Warning: 100 psi maximum lbs.
Not for brake lines

Annealed aluminum tubing is easily hand-formed to virtually any requirement. The tubing can be used with Earl's Tube-Mate Auto-Fit hose ends, it can be flared and used with Earl's 5818 tube nut and 5819 tube sleeve or an adapter can be welded onto the end(s) of the tube, or the ends can be beaded and used with Earl's Econ-O-Fit hose ends or with standard hose clamps. For clamping hose, tubing should be beaded.

Note: Packages that exceed UPS size limit of 96 inches (8 ft.) are subject to additional "Over Maximum Limits" charges.

In order to use Earl's Tube-MateTM hose end, the rigid tubing to which the hose end attaches must be either grooved or beaded.

Grooving wheel fits the Imperial-Eastman TC 1000 tube cutter.