 Stainless Steel Hose Assembly
3AN Female
to 3/8"(10mm) Banjo (.425 Thick)
Important: When considering the replacement of stock rubber brake hoses with stainless
braid-protected hose of extruded teflon you should consider the following facts:
The use of stainless braid protected teflon brake hose assemblies will result in a firmer
brake pedal, improved brake pedal "feel" and better brake modulation. These hoses will not
necessarily provide longer hose life or any other advantage.
We do not claim that
any individual hose assembly is certifiable to D.O.T. standards and we therefore must
advise you that they are sold to be used on off-road applications only. We make no claim
of useability or suitability for highway or road use. Teflon brake hoses must be installed
by an experienced professional mechanic. After installation each hose must be both clean
and free flowing. There must be no possibility that the installed hose assemblies can
stretch, crimp or kink under any conditions of wheel travel and steering angle. As with any
hose installation, periodic inspection of hose condition is essential.
|
|
These flexible pre-assembled hoses, are made for brake, clutch and instruments. Hoses are made
from stainless steel braid protected hose. The use of Stainless braid protected teflon brake hose
assemblies will result in a firmer brake pedal, improved brake pedal feel, and better brake
modulation. These ASR stainless braided hose assemblies are not manufactured by Earl's. Please call
1-800-990-1912 to special order Earl's brand hose assemblies
Typical applications
include: medium pressure hydraulic systems, flexible brake
and clutch hoses, and instrument hoses (most racing sanctioning bodies forbid the use of
unarmored hoses in the cockpit area).
Maximum Operating Pressure: 2,000 psi.
|
